Forming Dapping Swage Block Steel U-Channel 7 Hammers - 6 Rounds 1 Square Punch

Description

STEEL SWAGE U-CHANNEL
FORMING BLOCK & HAMMER PUNCHES
SWAGE FORMING & SHAPING TOOL
A tool steel Swage Block with 7 Hammer punches,
6 Round
forming punches and
1 Square
head punch.  Block has 6 half round U-Channels/Grooves and a 90° V-Groove on the bottom of the block, which can be used the square punch for bending. The Steel swage block and hammers are hardened with a polished smooth surfaces.
The punches are like hammers each one is made to use with the matching grooves of the block, all of the punches correspond to the grooves of the swage block.
A very well made forming and
shaping
tool, with a good finish, channels are smooth and polished.
SPECIFICATIONS:
JETS Product # 0407-29777
-
Round Punch Diameters:
8.3mm - 10.3mm - 13.8mm - 17.1mm  - 20.4mm - 23.3mm
-
Square Punch:
12.2mm
-
Block Dimensions:
62.mm x 165mm x 23.5mm
-
2-7/16" x 6-1/2"  15/16"
-
Weight: Block & Punches 4.6 Pounds - 2.1Kg
NOTE: Visit
JETSTOOLS
ebay Store Listings, where you can see many more Forming & Dapping Blocks,  Anvils, Steel and Wooden Blocks, Hammers and Forming Tools along with a selection of many more
J
ewelers
E
quipment
T
ools
&
S
upplies
.
JETSINC.
PFE 4L8z   4289 715
CKSP  Z M P